Ningbo Bonte Technology Co., Ltd
Industrial DC motors, engineered to pull their weight.
Bonte Technology designs and manufactures DC motors for hydraulic power units, electric winches and tarpaulin systems — plus custom battery wire assemblies — shipped to OEMs in 100+ countries.
Hydraulic Power Unit Motors
The heartbeat of every tail lift and power pack.
12V and 24V oil pump motors from 800 W to 4,200 W — duty-cycle rated, Class F insulated, and proven in tail lifts, dump trailers and aerial platforms across 100+ countries.
Winch & Tarpaulin Motors
Sealed to IP67. Built for mud, rain and recovery.
Bi-directional winch motors with high stall torque, and waterproof tarpaulin gear motors supplied as complete drive kits with 40:1 gearboxes and controllers.
Product Lines
Built for the machines that work hardest
Four product families cover the drives behind hydraulic power packs, recovery winches, tarpaulin systems and battery power distribution.
01
Hydraulic Power Unit Motors
Oil pump motors for hydraulic power packs, tail lifts, lifting equipment and special vehicles.
View models →
02
Winch Motors
Bi-directional high-torque DC motors for electric recovery and utility winches.
View models →
03
Tarpaulin Motors
IP67 waterproof gear motors for truck and trailer tarpaulin systems.
View models →
04
Battery Wires
Custom battery cable assemblies for EVs, power units and industrial equipment.
View range →
Hot-Selling Model
BT12000PLT — 12V Winch Motor
The BT12000PLT drives 12,000 lb-class recovery winches: a bi-directional series-wound motor delivering 6 N·m rated torque at 2000 W, sealed to IP67 for fording, mud and pressure washing. Class F insulation and a S2 2 min · S3 7%ED duty rating keep it pulling when the line load peaks.
12 V
2000 W
6 N·m
IP67
10.0 kg
Popular Models
All 28 models
Engineers' picks from the catalog
Industry Solutions
Where Bonte motors go to work
Pick your industry — each panel shows how the drive integrates and which series to start from.
Tail lifts, dock levellers & lifting equipment
Hydraulic power units live or die by their motor's duty cycle. Bonte oil pump motors are rated S2/S3 for exactly this rhythm — lift, rest, repeat — with windings from 800 W to 4,200 W and IP54 protection for chassis mounting.
- Tail lifts & liftgates · dump trailers · dock levellers
- Scissor lifts & aerial work platforms
- 12V & 24V windings, CW rotation, 9/2-tooth shafts
Recovery, utility & marine winches
Winch motors face stall loads, water crossings and salt. Bonte's bi-directional series-wound motors deliver high starting torque with IP67 sealed options, proven on 6,000–12,000 lb winch platforms.
- Off-road recovery & trailer winches
- ATV/UTV & marine anchor winches
- Bi-directional, IP54/IP67, 1,300–2,200 W
Roll-over tarpaulin & cover systems
A tarpaulin motor rides on top of the truck for the vehicle's whole life — rain, ice, pressure washing. Bonte tarpaulin drives are IP67 as standard and ship as complete kits: motor, 40:1 gearbox and controller.
- Truck & trailer roll-over cover systems
- Agricultural & grain transport covers
- IP67 · 3min-30%ED duty · complete drive kits
EVs, forklifts & battery power distribution
High-current DC connections are only as reliable as their weakest crimp. Bonte battery wires use fine-strand oxygen-free copper with calibrated crimping and pull testing, built to drawing for OEM production.
- Electric vehicles, LSVs & golf carts
- Forklifts & material handling
- Battery banks & energy storage
The Factory
Precision production, verified 100%
From armature winding to final load testing, Bonte runs high-precision machining centers and multiple fully automatic assembly lines in Ningbo, Zhejiang — with every motor inspected before it leaves the factory.
- ISO/TS 16949:2016 quality system, certified by AQA (USA)
- In-house R&D team for motors and wire assemblies
- 100% outgoing inspection with load and leak testing
- Custom windings, shafts, mounts and connectors on request
100+
Export markets worldwide
28
Standard motor models
ISO/TS 16949
Certified quality system
100%
Outgoing inspection
Why Bonte
Capabilities that keep OEM lines moving
/ 01
Quality management
Structured system covering incoming inspection, in-process checks, load testing and shipment — every motor leaves with verified parameters under ISO/TS 16949.
/ 02
Armature winding & balancing
Automated winding with dynamic balancing keeps vibration and brush wear low — the difference between a motor that lasts one season and one that lasts years.
/ 03
Sealing engineering
Shaft seals, gasketed end caps and sealed terminals deliver honest IP54 and IP67 ratings, validated by immersion testing.
/ 04
Custom windings & interfaces
Voltage, power and torque variants plus custom shafts, flanges and connectors — engineered from your operating conditions, not a parts bin.
/ 05
Factory-direct supply
No trading company in between: engineering answers from the people who build the motor, and pricing without middleman margin.
/ 06
Complete drive kits
Motors supplied with matched gearboxes, controllers and battery wiring — one supplier, one warranty, one integration to validate.
Latest Updates
All articles
From the factory floor
Jul 8, 2026
How to Choose a DC Motor for a Hydraulic Power Unit
Voltage, power, torque, duty cycle and IP rating — the five specifications that decide whether an oil pump motor thrives…
Jun 30, 2026
12V vs 24V DC Motors: Which Voltage for Your Application?
Same power, different current: what voltage choice means for cables, heat, battery life and motor lifespan in winches, p…
Jun 20, 2026
IP54 vs IP67: Waterproof Ratings in DC Motors Explained
What IP ratings really promise, how they're tested, and how to match IP54 or IP67 DC motors to power units, winches and …
FAQ
The questions buyers ask first
Do you support OEM / ODM customization?
Yes. Bonte develops custom windings (voltage, power, torque), shafts, mounting flanges, connectors and complete drive kits to customer drawings. The process starts from your operating conditions — duty cycle, load, environment — followed by feasibility confirmation, sampling and production.
Can I order samples before production?
Yes. Sample orders of standard models are welcome so you can validate fit and performance on your equipment before committing to production quantities. Confirmed samples lock the specification for series production.
Which markets do you export to, and on what trade terms?
Bonte products ship to more than 100 countries across Europe, the Americas, Australia, Southeast Asia and the Middle East. Common trade terms (EXW / FOB / CIF) are supported — state your preference in the inquiry.
How does quoting work?
Send the model numbers (or your requirements) with target quantities through the quote form. Our sales engineers review the application and reply with pricing, MOQ and lead time, typically within one business day.
Get Fast Support
Send your requirements to our engineers
Share your application, voltage and target quantity — whether you need a quick quote or a technical clarification, our team replies with practical recommendations within one business day.
- +86 130 2892 7799
- sales@nbbonte.com
- No.18-2 Ruhu West Rd., Simen Town, Yuyao, 315470 Ningbo, Zhejiang, China
Quick quote
Tell us the quantity and your application — we typically reply within one business day.